Specialized wire bonding and die bonding solutions
Model 572A Thermosonic Wedge Bonder
With HYBOND Soft-Touch™ bonding technology for sensitive materials
A proven world-wide track record for reliability and bonding control.
Model 572A’s motorized wire feed and wire/ribbon clamping system provide precise wire/ribbon control. Operators can easily adjust tail and pull lengths at a turn of a dial to enable bonding and cutting of softer (higher elongation) wires than conventionally used for wedge bonding.
- Precise feed system for superior control
- Intuitive front panel controls
- Soft-Touch™ bonding for reduced damage
- Infinite-angle microscope mounting
Superior wire/ribbon sensitivity and control with more wire/ribbon options
Model 572A has the flexibility to vary the amount of clamp “pull back” required to break the wire at the final bond, allowing the use of softer wires with higher elongation. Ease of operation features include a built-in work stage temperature controller, front panel independent controls for first and second bond, U/S, Time and Force as well as ultrasonic testing.
Model 522A Thermosonic Ball Bonder Features
- HYBOND Soft-Touch™ bonding technology for improved yields
- Independent Z-axis lever for bonding tool control
- Motorized vertical wire feed
- 1-1-2, 1-2-2 & 1-2-1 stitch capability
- 0.5” and 2” spool mounts
- Loop height control adjustment
- Front panel wire feed control for manual tail adjustment
- Swing-away wire clamp assembly
- Deep vertical access of 0.59" (1,49cm)
- Horizontal reach of 3.5" (8,89cm)
- Deep access Wire-In-Tool 90° wire feed
- Wire and ribbon bonding capability
- Independent control of 1st & 2nd bond parameters
- Tail length adjustable
- Audio and visual bond sequence fault indicators
- 6” x 8.5” work platform
- LED display of work stage temperature
- Infinite angle microscope mounting
- Front panel ultrasonic test button
Model 572A Thermosonic Wedge Bonder Specifications
- Ultrasonic System: PLL self-tuning, 62.5 KHz (±2.5KHz) nominal
- Ultrasonic Power Range: 0-1 watt on Low setting (default), 0-2 watts on High setting
- Bond Time Range: 10 - 400 mSec
- Bond Force Range: 15 - 150 grams
- Temperature Control Range: Ambient to 250° C
- Bondable Wire Diameters: 0.5 to 2.0 mils (12,7 to 50,8 µm)
- Bondable Ribbon Dimensions: Up to 1 x 10 mils (25,4 x 254 µm)
- Bondable Wire /Ribbon Materials: Gold and aluminum
- Bond Head Movement: Manual
- Bond Actuation: Switch at fixed height, actuated by lever
- Z Axis Travel: 0.5” (1,20 cm) maximumVertical
- Bonding Window: 60 -100 mils (152-254 µm)
- Table Motion: 4:1, manual
- Input Power Requirements: 120 VAC 50/60 Hz @ 10A (std) or 240 VAC 50/60 Hz @ 5A
- Minimum Bench Space Required: 20" x 20" (50,8cm x 50,8cm)
- Unit Weight /Shipping Weight: 50/135 lbs (24,9 / 61,4 Kg). Shipping weight will vary.
- Vacuum Requirement: Vacuum = 20 inHg minimum.
- Industry Standards: CE certified
Optional Features
- Nikon SMZ745 Stereo Microscope (OP-06B)
- Microscope, Camera, Monitor, etc. (CCTV-XX)
- Dual Fiber Optic Illuminator (OP-08A-LED)
- White LED Ring Illuminator (OP-08R1-LED)240VAC
- 50/60Hz Input Wiring (OP-12)Motorized de-spooler
- (OP-17)
- 8:1 X-Y Manipulator (4:1 Standard) (OP-30)
- Tool Heater and Temp. Controller (OP-31)
- Beam Lead/Die Pick, Place & Bond (OP-47)
- Heated Transducer for Tool Heat (OP-83)
- Heated Work Stage, 2.125in top (WST-15A)
- Heated Work Stage, 3.3in top (WST-15B)
- Heated Work Stage, rotating top (WST-15CM)
- Wire & Wedge Tool as ordered per application
Leading companies rely on HYBOND for technical assistance and support to help keep bonding operations running smoothly.
Dedicated as-needed Field Service
Our factory-based sales and support personal are trained in bonder maintenance and operation. If further on-site expertise is needed, we can deploy support personal worldwide to assist with anything from calibration and optimization to equipment maintenance.
Responsive troubleshooting and Technical Support
Our knowledgeable team is committed to helping you promptly – and free of charge via phone or e-mail. If the issue requires more hands-on attention, we can arrange an on-site service visit for resolution or repair.
Customized technical Training
Expand your expertise and essential skills through our wire bonding fundamentals course. Offered three times a year, and as part of tailored training for small groups, available on-site, or at our sunny California headquarters.
Trial samples and Applications Guidance
Our multi-industry bonding experience can provide valuable insight into your specific application requirements. We can set up a trial bonds and help you determine the ideal wire or die bonder for your needs.